Bell Click Release Face Shield Helmet Accessories
Bell ClickRelease shields are compatible with Bell Star (Older Model), Vortex, RS-1, Qualifier and Revolver helmets only. Bell aftermarket shields feature Bell's NutraFog II anti-fog, anti-scratch and UV protective coating.
- Colors: Clear, Light Smoke, Dark Smoke, Light Silver/Iridium, Light Blue/Iridium, Light Gold/Iridium, Dark Silver/Iridium, Dark Blue/Iridium, Dark Gold/Iridium, Hi-Def Yellow, Hi-Def Orange, Yellow Gradient
- Sizes: One Size
- SKU: 2010057-HC1, 2010058-HC1, 2010059-HC1, 2010060-HC1, 2010061-HC1, 2010062-HC1, 2010063-HC1, 2010064-HC1, 2010065-HC1, 2010066-HC1, 2010067-HC1, 2011342-HC1
New - Brand new item in original packaging (original manufacturer's warranty may apply).
Used Like New - Brand new and in perfect working condition. Original packaging may be missing or slightly damaged.
Lightly Used - Item has seen limited use but remains in good working condition. May show some limited signs of wear with small scratches or cosmetic blemishes. May arrive with damaged packaging or be repackaged.
Used - Good - Item may show slight to moderate use but remains in good condition and functions properly. Item may arrive with damaged packaging or be repackaged.
Used - Acceptable - Item is fairly worn but continues to function properly. Item may have identifying markings on it or show other signs of previous use. Item may arrive with damaged packaging or be repackaged.
|Standard Size||Hat Size||Inches||Centimeters|
|4XS||6 3/8||20 1/16||51|
|3XS||6 1/2 - 6 5/8||20 1/2 - 20 7/8||52-53|
|2XS||6 3/4 - 6 7/8||21 1/4 - 21 5/8||54-55|
|S||7 1/8||2 3/8||57|
|M||7 1/4 - 7 3/8||22 3/4 - 23 1/4||58-59|
|L||7 1/2||23 5/8||60|
|XL||7 5/8 - 7 3/4||24 - 24 3/8||61-62|
|2XL||7 7/8 - 8||24 3/4 - 25 1/4||63-64|
|3XL||8 1/8 - 8 1/4||25 5/8 - 26||65-66|
|4XL||8 3/8 - 8 1/2||26 3/8 - 26 3/4||67-68|
Measuring the head is only a starting point for the entire sizing procedure. Due to varying shapes, heads that are apparently the same size when measured by a tape may not necessarily fit the same size helmet. A small metal tape measure or a cloth tape may be used to make your initial measurement. You can also use a string, which can then be laid against a measuring tape.
Measure the circumference of the head at a point approximately one inch above the eyebrows in front, and at a point in the back of the head that results in the largest possible measurement. Take several measurements. The largest measurement is the one you want to use.